Project Description
Waterproof LED Power Supply 200W
Description
Waterproof LED power supply 200w is a type of constant voltage led power supply. It could be used for indoor and outdoor constant voltage LED Lighting. DC12V, IP67 Waterproof LED driver is very important to the lifespan of LED lighting. Enclosed power Supply always could prolong the working life of the led lighting and your project.
– Compact size, easy for installation
– High transfer efficiency
– Wide input range
– Stable constant voltage output
– IP67, both indoor & outdoor use suitable
– 100% full loading, 100% burn-in tested
– Overload/short circuit protection
| Part NO | SR-WP-200W-12V | SR-WP-200W-24V |
|---|---|---|
| Rated DC voltage | 12V | 24V |
| Rated current | 16.66A | 8.33A |
| Current range | 0~16.66A | 0~8.33A |
| Rated Power | 200W | 200W |
| Voltage tolerance | 12±0.5V | 24±0.5V |
| Ripple & Noise | <100mVp-p | |
| Load regulation | 1% | |
| Setup, Rise time | 1500ms/230VAC | |
| Hold up time | 1200ms/230VAC | |
| Voltage range: | 100~240VAC; |
|---|---|
| Frequency range: | 50~60Hz |
| Efficiency (Typ.): | >87% |
| Leakage current: | 3mA/230VAC |
| Overload: |
cut-off mode, output shuts down if over-loaded |
| Short circuit: |
Yes, hiccup mode, recovers automatically after fault condition is removed |
| Working TEMP.: | -25℃~50℃ |
| Storage TEMP. | -40℃~80℃ |
| Working Humidity: | 20~100% RH non condensing, refer to IP67 |
| Vibration: | 10~500Hz,2G 10min/1cycle,period for 60min,each along X,Y,Z axes |
| TEMP. coefficient | ±0.03%/℃(0~50℃) |
| Safety Standards: | EN 61347-2-13 |
| Withstand Voltage: | I/P-O/P: 3750VAC/1min/<5mA |
| Isolation Resistance: |
I/P-O/P: >100M Ohms / 500VDC/25°C / 70%RH |
| Dimension: | 304*71*45mm(L*W*H) |
| Weight: | 1.5Kg,10pcs/16Kg |
| Warranty: | 2 years |
Dimension:
FREE Quotation, FREE Obligation!
Need more information? fill in the following form to send us an inquiry. Don’t worry, It is free and safe! we will not abuse you and keep your email in secret！
